How to Use White Hills Cream with the Skincare Device: Step by Step

Choosing the right skincare products is important, but using them in the correct order is just as essential. When using the White Hills skincare device with White Hills Cream, following a clear and simple routine can make the experience more comfortable and organized without requiring a long or complicated process.

In this guide, you will learn how to prepare your skin, how to use the skincare device, when to apply White Hills Cream, and which precautions and common mistakes to keep in mind.

Quick Summary

For the correct order of use:

Cleanse the skin and dry it gently.
Use the skincare device on clean skin according to the device instructions.
Move the device gently and evenly without applying excessive pressure.
After completing the session, apply an appropriate amount of White Hills Cream.
Follow the instructions for both the cream and the device, and stop use if unusual irritation occurs.

What Do You Need Before Starting?

Prepare the following items in a clean and comfortable area:

White Hills skincare device.
White Hills Cream.
A clean, soft towel.
A mirror with good lighting.
The device user guide, especially for first-time use.

Preparing everything in advance helps you follow the routine calmly and reduces the need to touch the device or packaging with unclean hands.

Step 1: Cleanse and Dry the Skin

Begin by cleansing the face or the area where you plan to use the device. This helps remove dirt, makeup residue, and any previously applied products.

Use a cleanser suitable for your skin type, then pat the skin dry gently with a soft towel instead of rubbing it.

The skin should be:

Clean.
Dry.
Free from cuts or wounds.
Free from active irritation or inflammation.

Do not use the device on damaged or highly irritated skin, and avoid areas too close to the eyes.

Preparing the skin and skincare device before using White Hills Cream.

Step 2: Use the Skincare Device

Once the skin is clean and dry, turn on the device and begin with the lowest suitable setting, especially during the first use.

Move the device gently and evenly. Avoid pressing too hard or holding it in one spot for too long.

The session length should follow the instructions included with the device. In general, a short session may last approximately 5 to 10 minutes, depending on the device setting and how your skin responds.

Increasing the intensity or extending the session does not mean faster results and may cause discomfort or irritation.

How to Move the Device Across the Face

Divide the face into smaller areas to keep the movement organized.

Jawline

Start from the center of the chin and move the device gently toward the side of the face. Repeat calmly without pulling the skin.

Cheeks

Start near the nose and move outward toward the ear using a gentle motion that angles slightly upward.

Forehead

Start from the center of the forehead and move toward both sides while avoiding the eye area.

Neck

Move the device gently according to the direction shown in the user guide. Avoid pressing on the front of the neck or any sensitive area.

Upward movement of the skincare device along the face and jawline.

Step 3: Apply White Hills Cream

After completing the device session, apply an appropriate amount of White Hills Cream to the desired area.

Start with a small amount and add more only if needed, rather than applying too much from the beginning.

Spread the cream gently using circular motions and avoid:

The eye area.
Cuts and scratches.
Inflamed or irritated skin.
Highly sensitive internal areas.

Leave the cream on for the period stated in the usage instructions. According to the current method of use, it may be left on for approximately 5 to 15 minutes, then rinsed thoroughly with lukewarm water.

Do not rub the skin aggressively while applying or removing the cream.

Should the Device Be Used Before or After the Cream?

According to the current usage method, the skincare device should be used first on clean, dry skin, and White Hills Cream should be applied after completing the device session.

The correct order is:

Cleanse the skin → Use the device → Apply the cream → Rinse according to the instructions

Always review both the device guide and the directions on the cream packaging, as usage may vary depending on the device settings and the application area.

Patch Testing Before Use

Before using White Hills Cream for the first time, it is recommended to perform a patch test:

Apply a small amount to a limited area of healthy skin.
Wait for up to 24 hours.
Monitor for unusual redness, itching, or burning.
If no irritation appears, begin gradually according to the instructions.

This is especially important for sensitive skin or when using the product on a new area.

How Often Should the Routine Be Used?

There is no single frequency that suits every skin type. Therefore:

Follow the directions for both the cream and the device.
Begin gradually.
Use the lowest device setting at first.
Monitor how your skin responds.
Avoid overusing the routine.

More frequent use does not guarantee faster results and may increase the likelihood of dryness or redness.

Common Mistakes to Avoid

Using the Device on Irritated Skin

Do not use the device over wounds, inflamed blemishes, or severely irritated skin.

Starting with the Highest Setting

Begin with the lowest setting, especially during the first session. Increase only when suitable and permitted by the instructions.

Applying Excessive Pressure

The device should move lightly and comfortably. Strong pressure does not increase the benefit and may cause discomfort.

Applying Too Much Cream

Use an amount appropriate for the area. Applying more product does not mean better or faster results.

Combining Multiple Exfoliating Products

Avoid using White Hills Cream with several strong exfoliating products in the same routine to reduce the risk of dryness or irritation.

Skipping the Patch Test

Even if you have used similar products before, a patch test remains an important precaution.

How to Clean the Device After Use

After completing the session:

Turn off the device.
Wipe the device head with a clean, soft cloth.
Follow the cleaning instructions included with the device.
Do not immerse the device in water.
Do not use harsh cleaners or abrasive materials.
Store the device in a clean, dry place.

Regular cleaning helps maintain the device and keeps it ready for the next use.

When Should You Stop Using the Product or Device?

Stop using the cream or device if you experience:

Severe redness.
Persistent itching.
Unusual burning.
Pain or noticeable discomfort.
Swelling or increasing irritation.

Rinse the area gently with water. If symptoms continue, consult a doctor or pharmacist before using the product again.

Is This Routine Suitable for Everyone?

Skin response varies from person to person. Extra caution or medical advice may be needed in the following cases:

Pregnancy or breastfeeding.
An implanted medical device.
A chronic skin condition.
A recent cosmetic procedure.
Use of topical dermatological treatments.
A known allergy to any ingredient.

White Hills products are intended for cosmetic skincare and are not a substitute for medical diagnosis or treatment.

Frequently Asked Questions

Can White Hills Cream Be Used on the Face?

It may be used on healthy external skin according to the product instructions. Since facial skin is more sensitive, begin with a patch test and avoid the eye area, wounds, and irritated skin.

Can the Device Be Used Every Day?

Follow the device guide and begin with short sessions at the lowest setting. Do not increase the number or intensity of sessions in an attempt to speed up results.

Should I Use Sunscreen?

When the treated area is exposed to sunlight, we recommend adding a suitable sunscreen to your daily routine, especially when using exfoliating products.

When Can Results Be Expected?

Results vary depending on skin type, application method, and consistency. Some users may notice improved skin texture and softness, while visible radiance and a more even-looking tone may require continued use.

What Should I Do If Irritation Occurs?

Stop using the product and gently rinse the area with water. If irritation, itching, or burning continues, consult a healthcare professional.

Final Usage Summary

For a simple and clear White Hills routine:

Cleanse and dry the skin.
Use the skincare device with gentle movements.
Follow the recommended session time and settings.
Apply White Hills Cream after the device session.
Leave it on according to the instructions, then rinse.
Clean the device after use.
Monitor your skin and avoid overuse.

You can choose White Hills Cream on its own or use it as part of the White Hills Complete Package, which combines the cream with the facial massager for a more organized at-home skincare routine.